JASH F.R.P. Weir Gates

JASH F.R.P. WEIR GATES

Specifications

These gates are made as per JASH design.

Application

These gates are downward opening type gates and can be used either for

Decanting of a reservoir or a tank, or

For maintaining precise level control in a reservoir or a tank, or

To control the flow into or from a conduit as a sluice gate in locations where clearance between the opening and the gate operating floor is inadequate to allow raising of gate to fully open.

Salient Features

Flat back frame design for direct mounting on face of wall.

Designed for channel application, breast wall not required.

Suitable for seating head application.

Rising spindle Self Contained gate with lift mechanism mounted directly on gate frame.

Complete continuous sealing on sides and bottom of gate aperture at any position of shutter opening.

Plastic to rubber sealing arrangement on three sides.

Corrosion resistant material

Light weight hence easy to install.

Manual lift mechanism to enable a single person to operate gate with effort < 20Kgs.

Materials of Construction

Depending upon application and requirement, the client should select and specify the Materials of Construction for various components from offered alternatives.

Shop Testing Parameters

Seat clearance check for checking clearance between mating sealing faces.

Movement test for checking interference free movement of complete assembly.

Leakage test at atmospheric pressure if weir gate provided with sealing on all four sides for application (iii) above.

Optional Features

Electrically or Pneumatically operated lift mechanism with manual overide facility.

Gate opening indicating arrangement.

Additional sealing on top side for flow control into or from a conduit for application (iii).

Lift mechanism mounted on platform away from gate frame.

JASH F.R.P. WEIR GATES
Specifications
These gates are made as per JASH design.
Application
These gates are downward opening type gates and can be used either for Decanting of a reservoir or a tank, or For maintaining precise level control in a reservoir or a tank, or To control the flow into or from a conduit as a sluice gate in locations where clearance between the opening and the gate operating floor is inadequate to allow raising of gate to fully open.
Salient Features
Flat back frame design for direct mounting on face of wall. Designed for channel application, breast wall not required. Suitable for seating head application. Rising spindle Self Contained gate with lift mechanism mounted directly on gate frame. Complete continuous sealing on sides and bottom of gate aperture at any position of shutter opening. Plastic to rubber sealing arrangement on three sides. Corrosion resistant material Light weight hence easy to install. Manual lift mechanism to enable a single person to operate gate with effort < 20Kgs.
Materials of Construction
Depending upon application and requirement, the client should select and specify the Materials of Construction for various components from offered alternatives.
Shop Testing Parameters
Seat clearance check for checking clearance between mating sealing faces. Movement test for checking interference free movement of complete assembly. Leakage test at atmospheric pressure if weir gate provided with sealing on all four sides for application (iii) above.
*Optional Features*
Electrically or Pneumatically operated lift mechanism with manual overide facility. Gate opening indicating arrangement. Additional sealing on top side for flow control into or from a conduit for application (iii). Lift mechanism mounted on platform away from gate frame.