|
JASH STAINLESS STEEL OPEN CHANNEL GATES
SPECIFICATION : These gates are manufactured as Supplied as per Jash design.
APPLICATION : These gates are mounted / fixed in between two
parallel side walls of an open channel and are used to isolate flow
within as well as in and out of an open channel. These are suitable
for seating as well as unseating water head but the height of water
in both cases should be less than height of shutter.
SALIENT FEATURES OF STAINLESS STEEL OPEN CHANNEL GATES
| • |
Stainless Steel Open channel gates are designed for channel application, breast wall not required. |
| • |
Stainless Steel Open channel gates is suitable for flow from either direction. |
| • |
Self contained frame suitable for grouting within the side walls
of the channel on two sides and grouting within the floor of
channel on bottom. Frame to remain flush with channel walls as
well as channel floor after grouting. |
| • |
Frame of open channel gate comprising of HDPE shutter side guides encased in
stainless steel sections. |
| • |
Shutter comprising of stainless steel shutter plate reinforced
by stiffeners of same material. |
| • |
Metal to rubber sealing arrangement on three sides of Stainless
Steel Open channel gates . |
| • |
Flush bottom closure arrangement in Stainless Steel Open channel
gates. |
| • |
Stainless Steel Open channel gates is provided with pin and knuckle type stem connecting arrangement
to connect the shutter with the spindle. |
| • |
Single piece rising spindle to connect the shutter to the gate
operating arrangement mounted directly on gate frame. |
| • |
Manual lift mechanism to enable a single person to operate gate
with effort < 20Kgs. |
| • |
Corrosion resistant material used for increased life of
Stainless Steel Open channel gates |
| • |
Stainless Steel Open channel gates are economical and faster erection of fully assembled gate in a
single set-up. |
MATERIALS OF CONSTRUCTION :
Depending on application and requirement, the client may select and
specify the material of construction for various components from the
alternatives provided herein.
SHOP TEST PARAMETERS :
• Movement test for checking interference free movement of complete
gate assembly.
• Seat clearance check for checking clearance between mating sealing
faces.
OPTIONAL FEATURES :
• Stem cover either made of galvanized steel or transparent tube.
• Gate opening indicating arrangement.
• Non rising spindle.
• Electrically operated lift mechanism with manual override
facility.
• Pneumatically operated lift mechanism with manual override
facility.
• Portable electric / hydraulic operator for manually operated
gates. |
