Slide Gates / Penstocks

CAST IRON SLUICE / SLIDE GATES (SERIES: A-101, A-102, A-103, A-104)


FLAT BACK FRAME CAST IRON SLUICE GATES
  • APPLICATIONThese are vertically sliding gates used for isolation / control of water flowing in and out of a closed conduit / orifice for seating and / or unseating water head application.
  • STANDARDAWWA C-560, IS-13349, BS-7775.
  • MOUNTINGThimble Mounted / Wall mounted
  • SIZES (W X H)From 100×100 mm (4″x4″) up to 4000×6000 mm (160″x240″)
  • SEALING“Metal to Metal” and “Metallic to Rubber”
  • WATER HEADUp to 40 m (120′) seating / unseating
  • LEAKAGE PARAMETERAs per AWWA / BS Standards
  • ACTUATIONManual, Electric, Hydraulic & Pneumatic

STAINLESS STEEL SLUICE / SLIDE GATES (SERIES: A-111, A-112, A-113, A-114)


FLANGE BACK FRAME CAST IRON SLUICE GATES
  • APPLICATIONThese are vertically sliding gates used for isolation / control of water flowing in and out of a closed conduit / orifice for seating and / or unseating water head application.
  • STANDARDAWWA C-561, BS-7775.
  • MOUNTINGThimble Mounted / Wall mounted
  • SIZES (W X H)From 100×100 mm (4″x4″) up to 6000×6000 mm (240″x240″)
  • SEALINGNon-metallic
  • WATER HEADUp to 50 m (150′) seating / unseating
  • LEAKAGE PARAMETERAs per AWWA / BS Standards
  • ACTUATIONManual, Electric, Hydraulic & Pneumatic

ALUMINUM SLUICE / SLIDE GATES (SERIES: A-121)


Stainless Steel Sluice Gates
  • APPLICATIONThese are vertically sliding gates used for isolation / control of water flowing in and out of a closed conduit / orifice for seating and / or unseating water head application.
  • STANDARDAWWA C-562.
  • MOUNTINGWall mounted
  • SIZES (W X H)From 100×100 mm (4″x4″) up to 2000×4000 mm (80″x160″)
  • SEALINGNon-metallic
  • WATER HEADUp to 5 m (15′) seating / unseating.
  • LEAKAGE PARAMETERAs per AWWA
  • ACTUATIONManual, Electric, Hydraulic & Pneumatic

COMPOSITE SLUICE / SLIDE GATES (SERIES: A-151)


ALUMINUM  SLUICE GATES
  • APPLICATIONThese are vertically sliding gates used for isolation / control of water flowing in and out of a closed conduit / orifice for seating and / or unseating water head application.
  • STANDARDAWWA C-563.
  • MOUNTINGWall mounted
  • SIZES (W X H)From 100×100 mm (4″x4″) up to 2000×4000 mm (80″x140″)
  • SEALINGNon-metallic
  • WATER HEADUp to 10 m (30′) seating / unseating.
  • LEAKAGE PARAMETERAs per AWWA
  • ACTUATIONManual, Electric, Hydraulic & Pneumatic

HDPE SLUICE / SLIDE GATES (SERIES: A-141)


HDPE SLUICE GATES
  • APPLICATIONThese are vertically sliding gates used for isolation / control of water flowing in and out of a closed conduit / orifice for seating and / or unseating water head application.
  • STANDARDJASH
  • MOUNTINGWall mounted
  • SIZES (W X H)From 100×100 mm (4″x4″) up to 2000×4000 mm (80″x160″)
  • SEALINGNon-metallic
  • WATER HEADUp to 5 m (15′) seating / unseating.
  • LEAKAGE PARAMETERAs per AWWA
  • ACTUATIONManual, Electric, Hydraulic & Pneumatic

FRP WALL MOUNTED GATES (SERIES: A-161)


FRP-Wall-Mounted-Gates
  • APPLICATIONThese are vertically sliding gates used for isolation / control of water flowing in and out of a closed conduit / orifice for seating and / or unseating water head application.
    Jash offers these gates completely made from Fiber Reinforced Plastic (FRP) without any carbon steel internal reinforcements eliminates two different co-efficient of thermal expansion of these different materials. These gates are good for corrosive environment / seawater application.
  • STANDARDIn compliance to JASH
  • MOUNTINGWall mounted
  • SIZES (W X H)From 100×100 mm (4”x4”) up to 2000×2000 mm (80”x80”).
  • SEALINGPlastic to rubber.
  • WATER HEADUp to 5 m (15’) seating / unseating.
  • LEAKAGE PARAMETERAs per AWWA
  • ACTUATIONManual, Electric.