Depending upon the constructional features, sturdiness, intended use and flatness accuracy and surface finish required, JASH C.I. T-slotted Plates are offered differently as Precision Floor Plates, Floor Plates, Bed Plates, Light Duty Clamping Plates in sizes and with alternative flatness accuracies as stated in table with standard and optional technical features as stated below:

• Cored and ribbed construction
• Made from close grained plain cast iron to minimum Grade - FG:200-IS:210 having hardness within 160-220 HB.
• Castings stress relieved as a precaution against distortion.
• Smooth machined or rough ground or rough scraped or fine hand scraped surface finish as may be necessary to obtain desired flatness accuracy or as specified by the Buyer.
• Normally provided with longitudinally machined fixing T-slots conforming to IS:2013-1985 with tolerance H12.
• Supplied with suitable arrangement for levelling and anchoring on the floor.
  

• One T-slot and one side face provided accurately straight to serve as reference.
• T-slots of sizes different than those stated in table
• Cross T-slots, if possible.
• Grout holes on top
• Pockets on sides of plates to house bolts for interconnection of similar plates meant for obtaining larger overall made up size.
• Overall thickness of plate higher than dimension "T" stated in Table
• Stand mounting type with levelling screws either accessible from top or from bottom, as required
• Flatness accuracies as per DIN-876.