TRASH RACK SCREENS
SERIES: B111-2 – TRASH RACK WITH FLAT BARS
B11-2--flat-bars Trash rack with vertical flat bars spaced apart is used to prevent large floating wastes from travelling further into intake structure, pumping station and treatment plants. Depending upon water height and handling capability either a single rack or multiple racks stacked over each other can be used for this application. Cleaning of trash rack has to be done manually after mechanically lifting the rack up to operating platform using crane.
Bar Spacing 20 mm and above.
Channel width Maximum up to 5,000 mm.
Channel depth Maximum up to 15,000 mm.
Height of Single rack Maximum up to 3,000 mm.
Mode of operation Lifting beam / Electrically by crane hoist.
Material of Construction Carbon Steel / Stainless Steel 304, 316 / Duplex / Super Duplex. Other material on request.
Technical Features Click to open
Drawing & Data Sheet Click to open
SERIES: B112 – TRASH RACK WITH WIRE MESH
B112-wire-mesh Trash rack with wire mesh is used to prevent very fine and light weight floating wastes from travelling further into intake structure, pumping station and treatment plants. Depending upon water height and handling capability either a single rack or multiple racks stacked over each other can be used for this application. Cleaning of trash rack has to be done manually after mechanically lifting the rack up to operating platform using crane.
Bar Spacing 2 mm and above.
Channel width Maximum up to 5,000 mm.
Channel depth Maximum up to 15,000 mm.
Height of Single rack Maximum up to 3,000 mm.
Mode of operation Lifting beam / Electrically by crane hoist.
Material of Construction Carbon Steel / Stainless Steel 304, 316 / Duplex / Super Duplex. Other material on request.
Technical Features Click to open
Drawing & Data Sheet Click to open